Show simple item record

dc.contributor.advisorDu Toit, C.G., Prof.
dc.contributor.advisorKruger, J.H., Dr.
dc.contributor.authorKoekemoer, O.C.
dc.date.accessioned2018-10-19T08:22:52Z
dc.date.available2018-10-19T08:22:52Z
dc.date.issued2018
dc.identifier.urihttps://orcid.org/0000-0002-4780-2911
dc.identifier.urihttp://hdl.handle.net/10394/31463
dc.descriptionMEng (Mechanical Engineering), North-West University, Potchefstroom Campus
dc.description.abstractOne dimensional (1-D) systems CFD can be used to simplify the analyses of thermal-fluid problems with complex geometries as it has the capability to provide quick solutions on fluid dynamics such as pressure changes, temperature fluctuations and flow rates. Three-dimensional (3-D) component CFD is generally used to model more complex geometries, due to its ability to provide detailed information on fluid dynamics whether it be flow regimes, chemical reactions or multiple phase changes. Existing analytical models and experimental methods for the analysis of Air-Cooled Heat Exchangers (ACHE) are limited in their applicability and a full 3-D CFD analysis thereof can be very resource intensive. This study proposes the use of a coupled 1-D/3-D modelling approach to address these issues. The coupled 1-D/3-D modelling approach, utilizing Ansys® Fluent and Flownex® SE, was used to set up different air-cooled heat exchanger test configurations which were then compared with equivalent full 3-D CFD models simulated using Star-CCM+. The coupling procedure, between Flownex and Ansys Fluent was achieved through the continuous exchange of flow boundary conditions to ensure mass, momentum and energy was conserved through the single combined flow domain. The Flownex and Fluent networks are explicitly coupled by transferring temperature and heat flux between the two networks. For all the ACHE configuration test cases, the temperature of the water exiting the pipe network, the number of iterations, solution time and model size are the main attributes examined. These results will be compared with the relevant verification test case having the same input specifications and set up. This comparison of results between the two different solution approaches will form the basis on which the coupled 1-D/3-D modelling approach is tested.en_US
dc.language.isoenen_US
dc.publisherNorth-West Universityen_US
dc.subjectAir-Cooled Heat exchangersen_US
dc.subjectone dimensional1-Den_US
dc.subjectthree dimensionalen_US
dc.subject3-Den_US
dc.subjectcoupled 1-D/3-D modellingen_US
dc.subjectComputational Fluid Dynamicsen_US
dc.subjectCFDen_US
dc.subjectduct flowen_US
dc.subjectNumerical modellingen_US
dc.titleInvestigation into the coupled 1D and 3D numerical modeling of an air-cooled heat exchanger configurationen_US
dc.typeThesisen_US
dc.description.thesistypeMastersen_US
dc.contributor.researchID11714409 - Kruger, Jan-Hendrik (Supervisor)


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record