Green coal development for application in fixed-bed catalytic gasification

Abstract

A novel ‘green coal’ product formulation has recently been developed and the utilization concept tested at the North-West University coal research laboratories. Hydrothermal liquefaction was used to produce bio-oil and biomass char from sweet sorghum bagasse at operating temperatures ranging between 280 and 300°C, and the resultant char was mixed in various ratios (0, 0.25, 0.50, 0.75, and 1) with fine medium-rank C bituminous discard coal (<212 um) and CaCO3 (1–5 wt%). The mixtures were pressed into 12 × 12 mm pellets using an LRX press at a pressure of 4 bar and gasified using CO2 at atmospheric pressure and temperatures ranging between 800 and 1000°C. Kinetic parameters obtained from the experimental data showed that the reaction rate of the biochar was an order of magnitude higher than that of raw coal, with the blend containing 3 wt% CaCO3 having the fastest reaction rate. In order to study the effect of temperature and catalyst on the retention of elemental sulphur during combustion of the various pellets, a combustion set-up consisting of a furnace, glass bayonet-type reactor, Liebig cooler, liquid traps, and an SO2 gas analyser was used, with experiments conducted at temperatures between 500 and 800°C. As expected, sulphur retention was low for the raw coal and biochar blends, but increased significantly to between 56 and 86%, decreasing with increasing temperature, in the runs with added metal catalyst/sorbent. A simulation using FactSageTM predicted that >50% of the pyritic sulphur entering the fixed-bed gasifier would be removed from the gaseous phase as insoluble CaSO4 when operated in a catalytic gasification mode at a temperature of 800°C, which is in good agreement with the experimental findings